HK p30 AEP Review

So here i am, reviewing my brothers Umarex HK p30 AEP (airsoft electric pistol)

It takes 4 AAA batteries, so mine runs the equivalent of a 4.8v 900mah battery. It shoots around 180fps(.12s, which i don't recommend you use. go to Wal-Mart and buy some supersonic .2s*) and around 180 to 240 rounds a minute on full-auto. YES. FULL-AUTO. This pistol is both Semi- and Full-Auto. you control this via a switch just in front of your trigger finger (forward for Semi-, back for Full-Auto).

Components:
Body materiel - Plastic
Slide materiel - Plastic
Magazine - plastic, Stick type
Sights - plastic, Fixed
Hop-up - Fixed
Hammer - Plastic, non-functional. (doesn't even lock back.)
Safety - Plastic, secondary trigger
Trigger & Assembly - Plastic

Internals:
Short type motor
Plastic spring guide
Plastic Cylinder
Plastic piston
Metal Gears
Plastic recoil spring guide and...
FULL OF CHEAP GREASE!

Functions:
This gun is an Electric Blow-Back. it utilizes a double third gear to fire the gun, and then push the slide back to reload.

More things:
The slide is one piece plastic, and feels pretty sturdy, and it is also black. it has an orange flash-hider, in accordance with American law, and a clear body, in accordance with Canadian law. The Slide does not lock back, and the only safety feature is that you have to press down a second trigger before it will fire.

and, with the body, the issue i have is that the lower receiver is based of the 9mm Para model

and the upper receiver is based off the .40 S&W model.

Notice how on the 9mm there is no selector switch at the back, and how the .40 has the larger hammer Besides these discrepancies, the Umarex HK p30 is a nice gun for beginners or people who just want to own their friends and their spring pistols in some lame backyard airsoft.

Stock Parts: 3/5
Compatibility: 2/5
Control: 4.5/5
Accuracy: 3.5/5
Weight: 4/5
Overall: 3.5/5
Not the greatest gun, but good for the price.

* By the way, i don't purchase my BB's at Wal-Mart, Although i used to, and i am only recommending them for this gun, or your cheap springers, NOT GOOD QUALITY GUNS.

Army of Two Rios Mask

So the Mask is now fully painted, and it looks pretty good if I do say so myself. it took about 4 hours (30 minutes give or take for the paint to dry) but it was worth it. Here are the steps:

1. I applied one or my pre-cut, pre-fitted camo stencils on to the lower half of the mask and covered the Hammer. notice that the top was already covered for painting the hammer. I sprayed the mask green first

2. After waiting for it to dry, i pealed off the first stencil, and applied the second one. i then preceded to spray it brown.

3. after waiting for that to dry, I removed the second stencil. here is what the camo looks like. it kind of looks like those Chinese made toys that are painted camo.

4. After that, I covered the lower half in news paper so it would not get painted silver while i was painting the Hammer. i forgot to take a picture of the all silver hammer, before we prepped the handle to be painted brown, but we covered the top of the hammer with news paper so it would not turn brown.

So then i sprayed it brown.

After i waited for it to dry, i removed the news paper and the tape, and this is the final design.

And here is it on me

so thats my new mask.

Violence

nice=love
love=battlefield
battlefield=violence
therefore violence=nice

Army of Two

Now Based on the title, you would think this deserved to go on (null), but actually this has to do with my Army of Two style airsoft mask. For those of you who have seem it, you'll know its already pretty awesome. (for those of you who have not seen it)

Well if you hadn't yet seen it, there it is. In keeping with the trend of putting some thing related to your name on your mask, set by RAINBOW OPS, I am spray-painting my mask with a couple designs, namely, Thor's Hammer (the Marvel one)

so yeah. i have covered my mask in painters tape, and have the Hammer cut in on the upper left

By now, If you got this Far, you may notice the lower half of the mask is not covered. you may also have noticed 2 pieces of tape that could fit right there. well, i am painting the lower half woodland Camo, and i have my own personal design. here are the templates for the camo spray painting. they took like an hour to make. each. luckily for me, its only three colour woodland camo.

Basically, i paint the bottom half of the mask Forest Green, wait for it to dry, apply on of the templates, spray it with Brown, wait for it to dry, apply the second template, and spray it Black. it is very tedious, but it should work.  

This is how i plan on keeping the paint out from inside the mask. all other holes (e.g. eyes, nose)

Note: this is only my first mask, and i plan to get a better one as time progresses.

Note #2: This is my first paint job, and the paint not turn out as well as i hope it will.

ICS M4 CQB-r Review

All right. so if you have visited this blog before, you'll now that we are just up and coming. we don't have much to Report on but, starting now, when i get something airsoft related, i will review it on this blog, and include a link to the video review, which i post on YouTube.

I CHIH SHIVAN ENTERPRISE CO.,LTD.(ICS) M4 CQB-R Close Quarters Battle Assault Rifle. I got the sportline edition of this rifle, which has a plastic receiver. It also has a tinted black lower receiver, as well as a lot of metal for a Canadian gun.

Metal Parts (starting from the back):
Buffer tube
End plate
Forward Assist/Extractor thing
Charging Handle
Rear Sight
Top Rail
Body Pins
Fire Selector Switch
Mag. Release
Trigger
Trigger Guard
Dust Cover
Mock Bolt Carrier
Delta Ring
2 Piece RIS System
Outer Barrel
Fixed Front Sight
Front Sling loop

Plastic Parts (also from back):
Crane Stock
Pistol Grip
Body
Stock ICS C7/C8 300 round Hi-Cap Mag
Flash Hider

Other:
Butt Plate (Rubber)

So, as you can see it has a lot of metal when compared to other guns. I've Disassembled this gun a couple times before, and here is what i have to say about the internals.

Stock Internals

Gearbox/Mechbox:
Version 2 M4 gearbox, ICS Split design

Upper Gearbox
Build Materiel: Metal
Spring: M100 or equivalent
Spring Guide: Plastic
Cylinder: Metal
Piston: One metal tooth
Air nozzle: plastic

Lower Gearbox:
Build Materiel: Metal
Gears: Metal
Bushings: 7mm (not sure)
Bearing: 7mm (not sure)

Hop Up:
Build Materiel: Plastic

Inner Barrel:
Build Materiel: Brass
Diameter: 6.08mm (might be .05)
Length:...i'll get back to you on that...

Motor
ICS Infinite Motor
High ROF

Thats it for internals

Here are the specs for the gun.

Length: 778mm
Extended: 809mm
FPS: around 320fps
Range: 50m

Now here is rating Chart from the website of the store i got it from. The store is called Chi-gun Hobbies


*Rating Information
Hit                ★★★★★
Range           ★★★★
Control         ★★★★
Modification ★★★

Note: This rating table is only for referencing purpose. Accuracy is not 100% guarnteed.*

So, all in all, i think this is a great gun, the split gearbox allows for quick swap out of the upper gearbox, should it be necessary

Stock Parts 4/5
Compatibility 3/5
Control 4.5/5
Accuracy 4.5/5
Price 3/5
Weight 5/5 (to scale)
Overall  4.5/5


http://www.youtube.com/watch?v=2cn1qSH_6dQ

Newness

Guys Reviews from us has been changed to (null) and the url is nullreviewnotfound.blogspot.com

New Blog

Hey I got a new blog for video game reviews so check it out. Click the Title and go there

Blah

Havent been on this blog in a while. As you can see i'm now code named Ares. Woods is my avatar and I'm here again. Well this blog is not really as much of an airsoft blog as it is "Lets just post stuff." so yah, my return post to the blog. Welcome Back me.

Double Jumping

look, not only Asians can double jump

Chi You

umm who is Kratos if there is a kratos, it would be awesome to be him for all the things he did and the link to my person is http://en.wikipedia.org/wiki/Chi_You